10 Best Soundproofing Materials for Walls

Soundproofing material for walls comes in a variety of formats, each with its own set of advantages and disadvantages. Some of the most prevalent forms of sound-dampening materials are listed below. Some are simple to install, such as windows or wall coverings. In the case of wall insulation acoustic, the coating needs a little more effort.

However, lowering the decibels can be difficult due to the many different types of soundproofing materials available, each of which operates individually. The best soundproofing materials collect and absorb sound waves, preventing them from passing through barriers and improving audio quality.

Here we’re going to discuss the 10 best soundproofing materials for walls. 

Best Soundproofing Material for Walls

For a wide variety of soundproofing needs in 2022, here are the best soundproofing products and resources for walls. We’ve gathered the top 10 soundproofing materials so that anyone can do research on them.

Sure-Max 12 Moving & Packing Blankets-Pro Economy-80″ x 72″ (35 lb/dz weight) 

Soundproofing Blanket

The professional 80″ x 72″ premium-size blanket provides damage protection. It also protects the wall while moving or shipping furniture, appliances, and other important large goods, avoiding scratches, nicks, dirt, and moisture. As a result, this carpet is constructed with thick, padded virgin cotton batting and polyester binding.

Furthermore, as compared to other blankets, these blankets provide higher protection. On the other hand, Zig-zag stitching keeps the carpet’s interior cushioning in place and extends the padding protection.

This heavy-duty furniture blanket is about 34.9 pounds and includes a strengthened double-lock stitched fabric with nylon binding that is very resistant to tears and constructed to last.

Sure-max carpet is ideal for both commercial and residential use, and these adaptable blankets are ideally suited for safe. Floors, car upholstery, and other surfaces are all protected by breathable protection. In addition, this carpet’s double-sided structure adds ease and protection while wrapping or sliding furniture across floors.


  • They are large enough to cover furniture.
  • Soundproofing would be achieved by covering a big portion of a wall.
  • Appear to be long-lasting
  • There was no significant chemical odor, as reported by some reviewers.


  • They are quite thin.
  • There appears to be no padding between layers.
  • A little pricey.

Soundproofing Acoustic Studio Foam 

Soundproof Foam

The effective design of this foam is easy to install. The angled wedge shape of this panel enables maximum sound absorption. Moreover, its acoustical wall can be used permanently or temporarily. This panel includes soundproof foam glue squares, 24 packs, 3M General Purpose 45 adhesive spray, push pins, durable dual adhesive pads, or 3M Command Strips, all of which are included in this panel.

On the other hand, two-inch-thick foam is used to absorb mid-to-high harmonics and control and trap echoes. The wedge design is similar to eggshell foam and is excellent for sound absorption.

However, the acoustic panel has the most significant value of all noise reduction solutions. Using this studio foam, you can create a superb listening or recording environment. This foam will absorb 15–35% of the noise in the case of wall usage.

Moreover, the effect of the foam improves recordings at home or in the studio. Corporate studios, rehearsal rooms, concert halls, podcasting, churches, home theaters, voice booths, home studios, offices, man caves, dog kennels, utility closets, and more are also included in the list.

This foam is made in the United States and it is a class-A fire-resistant product. As per ASTM e 84, this acoustic foam has a class classification. The weight of this product is 9.6 ounces and the package dimension is 14.61 x 13.98 x 5.08 inches.


  • The echo has been significantly decreased
  • This is an excellent product with a variety of color possibilities.


  • Panel quality is not good 

A2S Protection 6 Pack Acoustic Foam Panels 2″ X 12″ X 12″ Soundproofing Studio Foam Wedge Tiles Fireproof 

6 Pack Acoustic Foam Wedge

A2S is a high-quality studio foam. They merely need to be vacuumed once in a while to keep them clean.

This product can mitigate slap and flutter echoes, waves, and reverb in all rooms. In addition, when paired with bass traps, you may achieve maximum sound control.

The foam provides 6-pack acoustic sound protection. which spans 6 square feet of wall and can also be used indoors windows, ceilings, floors, and soundproofing. The weight of the foam is 14.4 ounces, and the package dimensions are 13.7 x 12.2 x 6 inches. 

To save on shipping and overall costs, the product is squeezed. So, open the packaging and leave it at room temperature for at least 72 hours to restore its original form and size. and this is only for indoor use.


  • Color variation is cool.


  • Not very durable 
  • The huge soundproofing difference is not noticeable 

Acoustic Coat – Sound Deadening Paint

Acousti Coat

This ceramic surface paint is best for applying on the wall. This has a lot of color possibilities, but soundproof paint normally serves as a primer for the paint you wish to use. One can use this to create a soundproof barrier in the space before adding panels and other decorative elements.

As previously said, the more of these items you use in a room, the more soundproof it becomes, but the user must also keep in mind that the area will become warmer after applying the paint.

Topical paint reduces noise such as ringing, echo, and tinning. The product is non-toxic and environmentally friendly, and it can be applied with a brush, roller, or spray, or with a hopper spray gun. Which has a low odor and is simple to clean with soap and water.

It has two 15mil WFT prices, which are used to apply around a half-inch of gypsum board backing fixed to a 2″ by 2″ wood frame with 2″ of air space. The weight of this paint is 38 pounds, the coverage limitation is 100-150 sq. ft. per gallon and the size ‎640 Fl Oz.


  • The painting looks fantastic.
  • One gallon is plenty to cover the walls.


  • Quite expensive 

ATS Acoustics Panel 24x48x2 Inches, Beveled Edge, in Burgundy

ATS Acoustics Panel 24x48x2 Inches

Acoustic panels from ATS perform this product’s basic but critical function, which is sound absorption. The dimensions of this panel are 24x48x2. The 100% jute cover cloth is pleasantly textured. Instructions and wall-mounting hardware are provided.

The NRC of all acoustic panels ranges from 0 to 1. This number indicates how well the panel absorbs the sound that impacts it. For example, ATS Acoustic Panels are rated 1.0 out of 1 for a 2-inch thickness.

Because of the improved sound absorption, fewer panels are needed to treat your space adequately. ATS Acoustic Panels decrease reflections from the space’s hard surfaces in a recording studio or mixing room. 

This keeps the sound clean and devoid of any reverberation from any wall. When recording speech or vocals, this is highly critical. Acoustic panels in your home theater ensure that you and your audience get the most out of your system’s superb sound. Many houses of worship and other auditoriums across the country have used ATS Acoustic Panels to fix their acoustic concerns on a budget.

The weight of this panel is 10.5 inches. The product dimension is 24 x 2 x 48 inches. The acoustic panels are mostly for those who dislike the appearance of the spiked and pointed foam panels discussed above. These sharp foam panels absorb noise, ‘locked’ between the foam wedges.


  • Good for walls and ceilings
  • After use, the color of the room transformed greatly.


  • The noise level just in front of the panel is only 3 dB, which is barely audible to human hearing.
  • Cannot deflect echoes around a room
  • When exposed to the sun, the color changes quickly.

NEW LEVEL Charcoal Acoustic Foam Bass Trap Studio Corner Wall 12″ X 7″ X 7″ (4 PACK)

Charcoal Acoustic Foam Bass Trap Studio

Charcoal Professional Design Foam fully fills the target of the low and mid frequencies. These high-quality foam bass traps will help remove echo and unwanted sound in any studio. Furthermore, it helps to eliminate reverb and echoes of bass sounds and be versatile and adaptable to any room.

This particular foam is MADE IN THE USA and meets the requirements of CA TECHNICAL BULLETIN CAL 117-2013. This is the procedure and Equipment for testing the smolder resistance of padded furnishing materials. This item fits the criteria of the CAL 117-2013 methodology.

This foam is 11.3 ounces and 14.3 x 12 x 7 inches in dimension


  • Budget-friendly 
  • Great for corner reflection 
  • T-rex mouth facility pretended


  • Only absorb the mid-level frequency 
  • Deep bass frequencies can’t be absorbed

Fiberglass soundproof insulation

Fiberglass Soundproof Insulation 

When it comes to soundproofing, fiberglass has to be one of the best options. In enclosed facilities such as music production studios, it is useful to have soundproof walls, ceilings, and floors.

Sand is heated and whirled at high speeds to generate glass, which makes this soundproofing material. It is also typical for some acoustic fiberglass producers to employ glass powder in producing the product. The most popular types of fiberglass used for soundproofing are batts and rolls.

It measures the reduction in decibels (dB) as sound goes through; it absorbs the sound from the wall. It gives a room an STC 40 rating. According to the International Building Code (IBC), which specifies an STC 50 rating for walls, ceilings, and floors, it would be preferable to increase the STC to 55 or 60. When conventional 3-1/2″ thick fiberglass batts are used in wall cavities, the STC can be increased from 35 to 39. So the sound that passes through drywall decreases even more before entering the next room.


  • Budget-friendly
  • It’s good for joist spacing and normal stud spacing, and it’s free of impediments.
  • user-friendly and ideal for do-it-yourself applications


  • It traps dust 
  • Itchy bumps, burning, and small pieces of fiberglass may cause irritation. 

Egg Cartons

Egg Cartoons for Soundproofing wall

Some people think an egg carton can reduce sound, but that is a wrong concept. Egg boxes are made of very thin plywood that allows sound waves to pass through them directly, so they can’t help minimize noise.


  • Light weighted 


  • Do not reduce the sound 

Usage of Carpets 

carpet using for soundproofing

A hanging carpet can reduce the sound from any particular room. But carpets are not effective. But while carpeting your walls won’t help soundproof them, it can help enhance the room’s acoustics if done appropriately. Instead of being attached straight to a wall, the carpet should be hung roughly 125 mm away from it to form an air trap that will help dampen noise.


  • Directly attached to the wall 
  • Best for wall usage 


  • Don’t try to eliminate all noise.

Soundproof Drywall

Soundproof Drywall

There are several varieties of drywall, but Type X is the most typically used for soundproofing. It’s a fire-resistant board, and a 5/8-inch-thick board can withstand a fire for an hour, making it the best drywall for noise reduction.


  • It is simple to use.
  • It does not necessitate the use of additional layers.
  • It takes up less room on the floor.


  • The cost of these panels is higher.
  • Not suitable for chopping.

Buying Guide for Soundproof Wall Material

Before buying soundproof wall material, a few things need to be considered. 

NRC rating 

If someone wants to buy material with a high noise cancellation rating for soundproofing walls, then the noise reduction coefficient (NRC) is the technical term for this, and it will be a number between 0 and 1. A surface with a rating of 0 reflects sound and is best for absorption. But soundproof boards should have an NRC as close to 1 as possible, especially for large surface areas such as walls. 

STC rating 

The STC rating indicates how much sound is prevented from passing through a product, whereas the NRC value indicates how much sound is absorbed. Therefore, the STC rating is significant in limiting the quantity of sound entering or exiting a room.

An STC rating of 38–42 is regarded as suitable for home soundproofing. On the other hand, professional and industrial soundproofing for music studios, etc., have an STC value of 50–65.

Thickness and density 

The systemic absorption of a substance improves as its thickness increases. And, a material’s density is defined as its mass per unit volume. Therefore, the absorption edge rises as density grows. As a result, the thicker the material, the better.

Frequently Asked Question

What Kind of Soundproofing Materials Are Utilized on Walls?

Installing insulation, drywall, and acoustic caulk is the most cost-effective approach to soundproofing walls. Using drywall and other materials to create an airtight wall space is the best way to soundproof the walls efficiently. Furthermore, drywall is a solid sound barrier installed on top of the insulation and coated in to create an extra layer in the walls.

How Can I Avoid My Neighbors’ Hearing Me Through the Walls?

Installing acoustic insulation is one alternative, but it requires tearing down walls to the studs. Another option is to use dB-Bloc, a vinyl sound barrier material that may be put behind drywall or other completed wall or ceiling surfaces to help reduce noise transmission.

Bottom Line 

To conclude. If you are concerned about what is the best soundproofing material for walls, then read this article to learn about the 10 best soundproofing materials for walls. By using the soundproof blanket, acoustic foam, panel, paint, and fiberglass product anyone can make his wall soundproof

Robert Faulkner
Robert Faulkner

I'm Robert Faulkner, My profession is soundproofing. I'm still acquiring knowledge about sound and soundproofing procedures. Furthermore, I am very good at noise management and like sharing soundproofing ideas and methods for any situation.

Articles: 14

Leave a Reply

Your email address will not be published. Required fields are marked *